Details:
Brand: Channel Islands
Model: Sampler
Length: 6’2”
Width: 20 5/8”
Thickness: 2 3/4”
Volume: 37.50L
Fins: FCS ll (3 included)
Construction: Poly
Shipping Cost: $92.00
Description:
The deck has light back foot pressures, see the photos to view rest of pressure dent details.
Bottom has a large crude repair above the back right fin that is watertight.
Nose has a large crude repair that is watertight.
The board comes with a set of Thruster Fins.
More Information
(Below information is from Channel Islands Surfboards website)
Take your good wave game to conditions that are not. The Sampler was developed with Dane Reynolds to be that step-down board you ride a little shorter and wider in smaller or weaker surf while not sacrificing performance. It fits in your quiver between something fishy like a High 5 or Pod Mod and your normal shortboard.
Loosely based off the Dumpster Diver,it has flat, racy entry and center rocker,with ample curve out the tail for tight transitions and airs. A generous single concave runs the whole length of the board, with a slight double within the single between the fins, and just a little vee to provide kick off the tail. The outline is full but sleek in the front half, with an exaggerated and slightly forward of normal Merrick hip, and a wide old-school squash tail.
The Sampler is suitable for every level of surfer and should be ordered 2-4 inches shorter, 1/4 to 3/4 inches wider, and the same or slightly thicker than your normal shortboard.
Don’t understand the surfboard description lingo? Go to our Glossary of Terms.
