Details:
Brand: Channel Islands
Model: Sampler
Length: 6’1"
Width: 20 1/2"
Thickness: 2 5/8"
Volume: 35.2L
Fins: FCS II - 3 Boxes (not included)
Construction: Poly
Shipping Cost: $199.00
Description:
The deck has light back foot pressures, see photos to view pressure dent details.
The deck has some light surface scratches that are water tight.
The bottom has a small cosmetic blemish a little over halfway up to stringer that is water tight.
The nose has some small under glass shatters that are water tight.
The tail has one under glass shatter that is water tight.
The left rail has a medium crack towards the tail that is not water tight.
Don’t understand the surfboard description lingo? Go to our Glossary of Terms.
More Information
Info provided by Channel Islands Surfboards.
Take your good wave game to conditions that are not. The Sampler was developed with Dane Reynolds to be that step-down board you ride a little shorter and wider in smaller or weaker surf while not sacrificing performance. It fits in your quiver between something fishy like a High 5 or Pod Mod and your normal shortboard.
Loosely based off the Dumpster Diver,it has flat, racy entry and center rocker,with ample curve out the tail for tight transitions and airs. A generous single concave runs the whole length of the board, with a slight double within the single between the fins, and just a little vee to provide kick off the tail. The outline is full but sleek in the front half, with an exaggerated and slightly forward of normal Merrick hip, and a wide old-school squash tail.
The Sampler is suitable for every level of surfer and should be ordered 2-4 inches shorter, 1/4 to 3/4 inches wider, and the same or slightly thicker than your normal shortboard.
