Details:
Brand: T. Patterson
Model: Synthetic 84
Length: 5’7”
Width: 18.75”
Thickness: 2.25”
Volume: 26.43L
Fins: Futures (not included)
Construction: Poly
Shipping Cost: $92.00
Description:
The deck has shallow to light back foot pressures, see the photos to view rest of pressure dent details.
The bottom has a small under-glass crack near the nose that is watertight.
The tail has a few small under-glass cracks that are watertight.
The left rail has a one inch pro repair near the logo that is watertight.
The right rail has a one inch under-glass crack that is watertight.
More Information
(Below information is from T. Patterson Surfboards website)
The Synthetic 84 is a tribute to the good old days, when Timmy started his first surfboard label Synthetic surfboards and was working with the legendary Damian Brawner in the 1980’s. Timmy has taken all the positive aspects of boards he built then and has incorporated them into the modern shapes of today. This combo is nothing but pure magic and has been tested by some of the top surfers from around the globe. The consensus of all that have ridden the Synthetic 84’ was nothing but fantastic! As a matter of fact, the “psych meter” went through the roof! As result of such positive feedback, we had to release this one for all of you guys to try for yourself. This board’s niche is just between the Rising Sun and the high performance shortboard. It’s the missing link we are all looking for. The Synthetic 84’ can be ordered up with a bump squash or bump round tail. There is also the custom order option of adding the classic belly four channels that go under your front foot above the fins. The Synthetic 84 has a lower rocker and the bottom runs flat to a slight single into a slight double and fades into vee off the tail. The deck stays flat with a down rail and beak nose. This allows for maximum volume, yet the down rail lets you still sink this higher volume board onto rail in critical sections and off your bottom turns. It has a fuller outline so this board likes to increase your wave count and really comes in handy battling out the every day crowds. You will want to ride this model about 2 inches shorter than your everyday shortboard and comes in a tri fin set up.
* With its flat deck design, this board extends foam all the way to the rail, resulting in a high volume board. As a result, some customers may find it necessary to order this board 1/16 to 1/8 inch thinner than their usual preference in order to achieve their desired volume.
Don’t understand the surfboard description lingo? Go to our Glossary of Terms.
