Details:
Brand: Stamps
Model: Grinder X
Length: 5’11"
Width: 19 1/2"
Thickness: 2 3/8"
Volume: 27.5L
Fins: Futures - 5 Boxes (not included)
Construction: Poly
Shipping Cost: $89.00
Description:
See photos to view the pressure dent details on the deck and bottom.
The deck has a couple small water tight under-glass shatters, and a few small water tight surface scratches.
The bottom has a few small water tight under-glass streaks.
The nose has a crude repair on the tip of the nose that is water tight, and there’s a couple really small water tight under glass shatters.
There’s a couple small water tight under-glass cracks on the tail.
The right rail has one small shatter that is not water tight, and a couple of small water tight under-glass shatters. The left rail has a few small water tight under-glass cracks/shatters.
The left quad rear box has a couple small water tight under-glass cracks.
Don’t understand the surfboard description lingo? Go to our Glossary of Terms.
More Information
(Below Information from Stamps Surfboards)
Based off the DNA of the original Grinder model. Moderate rocker in the nose and tail. Single concave runs through the center, flattening out at the tail. Double concaves are inset in the single concave through the fin area. The overall width has been widened up about 1/4" and the nose pushed out about 1/2" at stock sizes. This board is ridden in everyday conditions by some of the world's best surfers.
