The Jordy Large Techflex thruster, designed in collaboration with championship tour surfer Jordy Smith, is a large sized fin in the Rake template category. The Techflex fin is Jordy's go-to when the waves are pumping and he desires a bit more control from his fins. The Techflex construction with the flat foil give this fin a stable feel, providing the speed control desired in powerful waves. This setup has a smaller center fin that the side fins for increased maneuverability.
- Template Category - Rake (drawn-out | drive)
- Construction - Honeycomb
- Ride Number - Speed Control – 3.2
- Suggested Wave Type - Open face | Point-break
- Size - Large (165+ lbs)
| Side Fins | Center Fin | |
|---|---|---|
| Area | 15.92 | 15.29 |
| Height | 4.68 | 4.49 |
| Base | 4.65 | 4.56 |
| Angle | 6.5 | SYMM |
| Foil | FLAT | SYMM |
BUY these fins, TRY them, and DECIDE if you want to keep them. If not, return them within 30 days for a full refund. There are a few rules See Full Details HERE!
These fins were ridden in the honeycomb construction in Usedsurf’s Fin Spex Project. Since the template is the same , even though the construction is different, perhaps you will find some info helpful.
Jordy Thruster HC - This fin had good speed and hold. I could push on turns harder on the Jordy's than the AM2's and it would carve through nicely. Very similar to the AM2 as far as having bigger fronts and a smaller trailing fin. The Jordy trailer I believe was a little bigger than the AM2 trailer. I felt like on the board I was on, which had a fair amount of tail rocker, the Jordy's looked and felt better than the AM2's. Watch Episode
