Details:
Brand: Channel Islands
Model: Neckbeard 2
Length: 5'9"
Width: 19 5/8"
Thickness: 2 1/2"
Volume: 31.2 L
Fins: FCS II (Not Included)
Construction: Poly
Shipping Cost: $78
Description:
The deck has a usual amount of shallow to light pressures. The front foot pressures are shallow to light, while the back foot pressures are shallow.
The bottom has a usual to quite a bit amount of shallow to light pressures.
On the nose are a couple underglass cracks that are watertight.
On the tail is a small chip that is not watertight, a long crack on the right said rail that is not watertight, and a couple pro repairs that are watertight.
The left rail has a medium shatter that is not watertight, and the right rail has a couple underglass shatters that are watertight.
The left fin box has a pro repair that is watertight.
For this board the Fin Guru recommends:
With Similar Template to AL Merrick but with a full size Trailing Fin Generating More drive and Touch Longer Arcs Fin Guru recommends:
Or for even more hold and drive Fin Guru recommends these Upgrade fins:
Lowest Price Fin Options
Note: The Glass Flex material flexes the most, therefore, it gets the job done but has the weakest “snap back”
Powerful, drawn-out turns. Excels on open face waves.
Carver FCS II Glass Flex Tri Set - Sizes MEDIUM and LARGE Only
Balance of speed, flow and response. Suitable for all conditions.
Performer FCS II Glass Flex Tri Set - Sizes SMALL and MEDIUM Only
